The Skyscraper Simulator Forum

This building is available in Elevator1512's YouTube Building Integration integration project. Link to the forum topic: https://skyscrapersimulatorforum.createaforum.com/integration-projects/elevator1512-productions'-projects/ Is this what you are looking for, or do you want the Level Up - Complete Upload building by itself? If so, I can send it to you by way of PM.

Update: November 5, 2025
Shafts started
The floors for both buildings and their columns are now complete, and a few columns were also moved. I have also started work on the shafts of the "core" section of the Seashell Building, by adding the cuts for the shaftworks, but none of the stairwells are started yet. This "core" section includes the service elevators, all three hotel elevator banks (L, 22 express, 22-30, and 22, 33-40), and two stairwells. Coming up, I will complete the aforementioned shaftworks and start on the remaining shaftworks (L, 41-42 observation express, L-5 conference, L, 6-11 office, L, 14-20 office, and L-5 Sandbar Wing) and all four stairwells.
To-do (structural):
- Columns: Done
- Floors: Done
- Interfloor: Making good progress
- Elevators: Barely started
- Stairwells: Not started
Screenshots:
https://imgur.com/nVLxtLY
https://imgur.com/UeO5gqY
https://imgur.com/INWwVjw
https://imgur.com/tWawnzh
https://imgur.com/UUOQ4Ku

Update: October 9, 2025
Second building starting...
I have just started work on my second building for this IP, the Palm Tree Plaza. I have added the ground, flooring to both buildings, and some columns to the Seashell Building. If you haven't noticed already, I created a grid texture (similar to the one that Skyscraper Simulator Showcase uses in his buildings), to assist with wall and column placements. Next up, I will complete the column frame and start work on floors above L.
To-do (structural):
- Columns: Barely started
- Floors: Barely started
- Interfloor: Not started
- Elevators: Not started
- Stairwells: Not started
Screenshots:
https://imgur.com/iw68xPM
https://imgur.com/SDmMThU

Update: September 12, 2025
Coming soon, second building!
I have just finished planning out the second building for this IP, the Palm Tree Plaza. This will be a complete from-scratch overhaul and continuation of HeisTeknikk's Teknikk Plaza, which never came out of version 1 pre-release. It will be a two-building complex, fictionally set in Miami, Florida. The first building will be the Seashell Building, which will be mixed-use. Floors 6-11 and 14-20 will be offices, while floors 22-30 and 33-40 will contain a hotel (including a lobby/pool on floor 22). Floors L and 2 will contain the main lobby and mezzanine respectively, while floors 41 and 42 will contain the observation deck and crown restaurant respectively. Mechanical floors are present on floors 12-13 and 31-32. Lastly, floors 3-5 will have meeting rooms similar to Mn10's Transnational Office Plaza. The second building will be the Sandbar Wing, which is auxiliary. This building will have offices on all of its floors (L-5) and an atrium with glass elevators. It will be connected to the Seashell Building via a skybridge on floor 2.
Pictures:
https://imgur.com/r8NfxJK

Release: August 29, 2025
g-ElevIntegration Build 3
Download - Full release build
Download - Patch build

Instructions:
Note: the latest build of the EG881 Integration Project must be downloaded first before you download g-ElevIntegration, and the patch build requires Build 2 to be installed.
Click "Download" to download the release. It will automatically download for you. Once it is downloaded to your preferred download destination, extract the files from the .zip folder into your "skyscraper" folder, (if using the patch build) replace all files when prompted, and then you are done.

Information:
This releases a major update to the Carter Building that includes the addition of LUVI'S, the first "building-within-building". The office floors have also been finished, with tenant spaces and custom ceilings added.

Poll:
Voting has closed. The winner is:
A continuation of Teknikk Plaza, which has 9 votes

Update: August 28, 2025
Custom office ceilings!
Expected release timeline of g-ElevIntegration Build 3: Next 2 days
I have just completed the wood details around the doors of LUVI'S, both entrance and balcony. I have also started work on the custom ceilings for the office floors, with the ceiling texture being changed and custom lights being added. Additionally, I have fixed a bug only present on floor 11 where the floor was higher than it should be. When I get done with the custom ceilings for the office floors, I will release the long-awaited g-ElevIntegration Build 3!
To-do (LUVI'S):
- Elevator: Done
- Flooring: Done
- Walls: Done
- Ceiling: Done
- Signage/minor details: Barely started (will wait until after g-ElevIntegration Build 3)
Screenshots:
https://imgur.com/iYgx6QY
https://imgur.com/jAphF1m
https://imgur.com/jgdOyxU
https://imgur.com/SA7o4xs
Poll:
Last chance to vote for buildings! Make sure to post a reply in this topic detailing what building you voted for. The poll will be drilled into the ground when I upload g-ElevIntegration Build 3, expected in only 1-2 days, so again, last chance! So far,
- No building at all: 0 votes
- A Simple building modification: 0 votes
- A version 2 of the Himmelstor Hospital: 8 votes
- A continuation of Teknikk Plaza: 9 votes
- An improved version of the Glass Tower: 4 votes
- A heavy modification to the original version of Skyscrapersim Housing Estate - Section 3: 2 votes
- A heavy modification to the original version of Transnational Office Plaza: 1 vote
- Starting from scratch, a version 8 of Veranda Plaza: 0 votes
- Starting from scratch, a new Embassy Suites hotel in escalatorgeek881's city of Andersville: 5 votes
- Starting from scratch, a new convention center named Elderville Convention Center, with the creation of the fictional town Elderville, MI, which it will be located in: 6 votes

Update: July 30, 2025
LUVI'S structurally complete
Expected release timeline of g-ElevIntegration Build 3: About a month
I have got all of the windows added for LUVI'S, along with the railings around the balcony. This means that LUVI'S is now structurally complete. Next up, I will start work on the wood details around both the entrance and balcony doors.
To-do (LUVI'S):
- Elevator: Done
- Flooring: Done
- Walls: Mostly done (wood details left)
- Ceiling: Done
- Signage/minor details: Barely started (will likely wait until after g-ElevIntegration Build 3)
Screenshots:
https://imgur.com/gm3ssTH
https://imgur.com/pD8G5nc
https://imgur.com/OtHMiSb
https://imgur.com/QdZB56S
https://imgur.com/633h3gi
Poll:
Keep voting for buildings in the poll above! Make sure to post a reply in this topic detailing what building you voted for. The poll will vanish into a black hole when I upload g-ElevIntegration Build 3, expected early-to-mid August. So far,
- No building at all: 0 votes
- A Simple building modification: 0 votes
- A version 2 of the Himmelstor Hospital: 7 votes
- A continuation of Teknikk Plaza: 7 votes
- An improved version of the Glass Tower: 4 votes
- A heavy modification to the original version of Skyscrapersim Housing Estate - Section 3: 2 votes
- A heavy modification to the original version of Transnational Office Plaza: 1 vote
- Starting from scratch, a version 8 of Veranda Plaza: 0 votes
- Starting from scratch, a new Embassy Suites hotel in escalatorgeek881's city of Andersville: 5 votes
- Starting from scratch, a new convention center named Elderville Convention Center, with the creation of the fictional town Elderville, MI, which it will be located in: 6 votes

The Pyramid Plaza seriously resembles the Luxor Hotel in Las Vegas, Nevada when you look at it from the outside. I like the use of the Montgomery Vector fixtures. Are all four buildings (the Pyramid Plaza, the Sandy Spire, the Palace Tower, and the Palace Grand) going to be in one city map?