Author Topic: Designing a Simple Gemini Tower (Concept)  (Read 255 times)

Offline chuhei

  • General Member
  • Posts: 32
  • I should be the wielder.
  • Location: HONG KONG
    • View Profile
    • My videos
Designing a Simple Gemini Tower (Concept)
« on: September 12, 2021, 11:02:06 am »
Once low-rise OK, High-Rise is no questions at all.

You like add a bridge at 300th floor? Do As you wish. 

Depending location, Many people might just know Menara Petronas or The twin tower in Malaysia, Of course the looking. In the world, It is said, Hong Kong has two locations like this while Nina tower (Tsuen Wan) has a bridge at 41st floor. The Hotel Cordis has a bridge to shopping centre (Mong Kok) at fourth floor.

Whatever it is , After stair problem solved, the next thing is if It is possible to simulate a whole, If in the worst case, I have to simulate ten towers in one map.  During time, may need a bridge to connect each other, also need adding road for fun. That's another story as Most of core problem is not fully dealt.

To see my progression? You may download the text file from to try, The overall looks like Moving a Complete building at a second location. It is said, This is a forty feet wide tower, so not only the gap, also plus the base. If more complicated, you proably like giving up.


http://cloudflare-ipfs.com/ipfs/QmX9CRQZqr96mTHP69hZP66ujhLUTgdvWY5Hxi3yFtLR1k

(Noting that I still am improving )


P.S Have read wrong? You have not read wrong, I just use one of points to access a file in pinata.cloud. As I use a replication service, If the storage allocated is not over than 200MB, then nothing shall be charged.

You might check others gateway from https://ipfs.fooock.com/ when cloudflare not work.
Roma does not take one day to build

Share on Facebook Share on Twitter