The Skyscraper Simulator Forum

How to use Beno Building Creator 2 in 19 steps
Due to this creator cannot create below of -10 or above of 63, This buiilding only create floors -9 to 62.
Step 1: Enter http://beno.org.uk/skyscrapersim/creator/
Step 2: Click "Create a new building"
Step 3: Draw a room by clicking "Build" Button
Step 4: Draw a walls by clicking "Wall" Button
Step 5: Add a door or entrance by clicking "Door" Button
Step 6: Add a elevator by clicking shaft number, Lowest is 1, Highest is 36.
Step 7: Choose a elevator
Step 8: Type a lowest and highest floor, Lowest is -8, Highest is 62.
Step 9: Type a shaft in x-axis and z-axis, This message box is can type unlimited number.
Step 10: Type a lifts in shaft, If shaft X-axis and Z-axis is same, Creates one elevator.
Step 11: After creating elevator, Choose a custom floors.
Step 12 (Only Advanced Users): Choose glass walls or doors.
Step 13: Before creating building, You need to choose a textures.
Step 14: After choosing textures, Click "Create" Button
Step 15: Choose a Start Point.
Step 16: Copy the Building code.
Step 17: Open Notepad, then paste the building code.
Step 18: Save as ".bld" extension
Step 19: Open Skyscrapersim, then play.
Enjoy!