Forum > Tutorials
Simple Building 2021
(1/1)
chuhei:
The sample is actual useful, You have your usable roof, also having basements.
After serval tries, I decide to release as a starting point.
1. Stair placement is solved
2. The outside door now has a better look, instead leaving a hole after doing some math.
3. Typical one Basement floor, Two floors for machine (To make something as Actual as possible, If for MRL simulation, then still need one basement floor as buffer while no need two additional floors for machine )
4. Slightly Easier to maintain floors, Perhaps I can set which one is a sky lobby (In reality, It can be slightly higher than general floors, for example, 15 feets instead of 10 feets), which one is a roof
Things need to be dealt
#Still need finding a way for locking additional doors as in the demo , only the stairdoor is effective, I am going to check if there is at least one way to lock these additional doors.
What is a reason of adding doors at elevator shaft?
1. Distance between two stops is at most 11 meters (BDHKSARG code)
2. I like adding doors not at front, can be at left side of right side even the back of the shaft
3. Is there a way to rotate stair?
4. Is there a way to rotate elevator perfectly as I need to do two front, two back for later projects
I am asking if it is possible to make a circle base.
If you look for other buildings, then you need to pay, The details shall be released when available.
Personally, I generally upload my prototype on ipfs first. Because of some reasons, I provide google drive link. Beware, Google drive link should be considered as temporary only as I do not fully trust these people.
GOOGLE DRIVE LINK: https://drive.google.com/file/d/1NROEqWJzIsU1yFgEZ62Cl46zop5Pitay/view?usp=sharing
IPFS LINK: https://cloudflare-ipfs.com/ipfs/QmbLhALttjrPMFsuDjQyzJ5c2vjBatjuMu3YCQPemNPqAb (This can be lasted for little longer. Remember, IPFS doesn't mean can be kept for a long time, Just buying me some time, IPFS content can be removed if the last point don't hold the content )
NothingCanStopMe357:
The links do not work :(
Is there an updated version, perhaps?
chuhei:
Yes. The overall can be painful, I am redrawing this from zero at a moment.
Navigation
[0] Message Index
Go to full version